Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Evergreen, CA
Chimney repair in Evergreen is often a bigger job than homeowners expect, because so many of the area’s 1980s and 1990s tract homes were built with clay-tile flues that crack and separate after decades of heating-and-cooling cycles. We see this pattern constantly in the foothill-edge subdivisions off the east side. Chimney Sweep Blossom Valley has served Evergreen since 2014, handling repairs, sweeps, and dryer vent work with professional chimney-trade materials, not hardware-store substitutes. Call (833) 593-5179 for a free estimate.
Why Evergreen Homes Are Different
Evergreen’s housing stock skews heavily toward 1970s through 1990s single-family stucco and wood-frame homes on hillside lots, and a striking number of them still have their original masonry fireplaces. Those fireplaces were built with clay-tile flue liners, and after 20 to 30 years of seasonal use, those tiles crack and the mortar joints between them open up. That’s not a cosmetic issue. Gaps in a flue let heat and combustion gases reach the wood framing around the chimney chase, and that’s how chimney fires start in an era of home that rarely gets inspected.
The climate here makes it easy to forget the fireplace exists for eight months of the year. Warm, dry summers mean the damper sits closed, and mild, rarely-freezing winters mean the fireplace gets lit for ambiance and occasional evening heat rather than daily use. But that intermittent use has a downside: creosote from holiday and weekend fires builds up in layers, and because the fires aren’t hot or frequent enough to burn it off, it accumulates season after season. By the time a homeowner notices a problem, the flue often needs more than a sweep.
In the hillside tracts off Evergreen’s east edge, our techs routinely find original 1980s dampers seized open or shut from disuse, and flue tile gaps hidden behind stucco chases. Flatland tract-home crews rarely encounter these conditions, which is why camera-guided flue inspection matters so much here. You can’t see a cracked tile from the roof, and you can’t see it from the firebox. You have to look inside the flue itself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Evergreen Services
Evergreen homeowners call us most often for two things, and they’re usually connected: a chimney that hasn’t been swept in years, and a dryer vent that’s quietly packing lint into a fire hazard behind the wall.
Chimney Sweep in Evergreen
A chimney sweep in Evergreen on a 1980s or 1990s foothill home often uncovers more than creosote. We use camera-guided inspection on every sweep because the clay-tile flues in this housing stock hide cracks behind stucco chases that no visual check can catch. Removing creosote is the core of the job, but the camera tells us whether the flue is still safe to burn. For the full breakdown of what a sweep includes and what it costs in Evergreen, see our Chimney Sweep in Evergreen page.
Dryer Vent Cleaning in Evergreen
Dryer vents in Evergreen’s older homes often run long horizontal stretches to reach exterior walls, and every foot of that run collects lint. A restricted dryer vent doesn’t just slow drying time. It pushes heat back into the appliance and the wall cavity. We build dryer vent runs with Famco components, purpose-built parts rather than improvised ductwork. For details on what a full cleaning involves and what it costs in Evergreen, see Dryer Vent Cleaning in Evergreen.
Chimney Repair in Evergreen
Chimney repair in Evergreen is rarely a one-part fix. Homes built in the 1980s and 1990s along the foothill edges of the east side were typically constructed with wood-burning fireplaces and clay-tile flues, and after 20 to 30 years of heating-and-cooling cycling, those tiles crack and the mortar joints between them open. In flatland cities, a sweep fixes most call-outs. In Evergreen, the camera usually finds structural work that needs to happen first. That’s why our repair work leans so heavily on inspection, and why we stock DuraFlex, HeatShield, and Copperfield materials on the truck instead of running to a supply counter for generic parts. You can read more about our repair services at our Chimney Repair hub.
Chimney Cap Installation
Signs you need it
You hear animal sounds in the flue, see rust staining on the chimney chase, or your existing cap is missing, bent, or rusted through, leaving the flue open to rain and embers.
What it costs in Evergreen
In Evergreen, expect to pay between $350 and $650 for a quality stainless or copper cap installed, depending on flue size and roof access.
How we do it
We measure the flue opening, inspect the crown for cracks that would undermine the new cap, install a Copperfield or Gelco cap with a proper spark arrestor, and seal the base so water can’t creep underneath.
Chimney Liner Installation
Signs you need it
Your camera inspection shows cracked clay tiles or missing mortar joints, or you smell smoke in rooms adjacent to the chimney even when the damper is closed.
What it costs in Evergreen
Liner installation in Evergreen homes typically runs between $2,500 and $6,000, depending on the flue’s height, diameter, and whether the old liner needs full removal first.
How we do it
We run a camera through the existing flue to document the damage, size the DuraFlex liner to the appliance and flue dimensions, thread it down from the crown, and insulate and seal the assembly so exhaust moves out cleanly.
Chimney Crown Repair
Signs you need it
You see hairline cracks across the concrete crown, spalling or flaking at the edges, or water staining on the ceiling near the chimney chase, meaning water is getting through the crown and into the masonry below.
What it costs in Evergreen
Crown repair in Evergreen generally costs between $450 and $1,200, depending on whether the crown can be sealed and reshaped or needs partial rebuilding.
How we do it
We clean and prep the existing crown surface, apply a Gelco or Olympia Chimney crown coat that bonds to the concrete and flexes through temperature swings, and re-slope the surface so water drains away from the flue.
What Chimney Repair Costs in Evergreen
| Item | Typical range in Evergreen |
|---|---|
| Chimney cap installation | $350 – $650 |
| Chimney crown repair | $450 – $1,200 |
| Chimney liner installation | $2,500 – $6,000 |
How often do Evergreen chimneys actually need repair?
On 1980s and 1990s homes with original clay-tile flues, expect structural repair every 20 to 30 years. The crack pattern usually shows up on camera before you notice anything in the house, which is why inspection during each sweep matters.
Can a cracked flue liner wait until spring?
No. A cracked liner lets heat reach the wood framing around the chase every time you light a fire, and winter is exactly when Evergreen homes burn most. If the camera shows tile gaps, stop burning until the liner is addressed.
Brands We Service in Evergreen
We stock and install Copperfield caps, DuraFlex liners, HeatShield restoration materials, and Gelco and Olympia Chimney crown products on our trucks serving Evergreen. That means most repair jobs start and finish the same day without waiting on a supply-house order. You can read more about the materials we carry on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Evergreen, CA
| Service | Typical range in Evergreen |
|---|---|
| Chimney sweep | $170 – $340 |
| Level 1 inspection | $100 – $250 |
| Level 2 camera inspection | $250 – $500 |
| Chimney cap installation | $350 – $650 |
| Chimney crown repair | $450 – $1,200 |
| Chimney flashing repair | $400 – $1,000 |
| Chimney liner installation | $2,500 – $6,000 |
| HeatShield liner restoration | $1,800 – $4,500 |
| Dryer vent cleaning | $95 – $190 |
| Dryer vent repair or reroute | $150 – $500 |
The two biggest price drivers in Evergreen are roof pitch on hillside lots and the condition of the chase behind stucco, which can hide water damage that only shows up once we open the wall. You’ll always get a flat-price quote before we start, so the number we agree on is the number you pay.
Neighborhoods We Serve in Evergreen
We work throughout the 95148 ZIP and the hillside tracts along Evergreen’s east edge, where the 1980s and 1990s homes with original clay-tile flues are concentrated. We schedule by area rather than by individual call-out, which keeps response windows tight across the whole neighborhood.
- Evergreen Village
- The Ranch
- Evergreen Hills
- Montgomery Creek
- Canyon Creek
Service Area – Cities Near Evergreen
Chimney Sweep Blossom Valley serves Evergreen and the surrounding east San Jose foothill communities. If you’re just over the line in East San Jose, CA, Berryessa, CA, Silver Creek Country Club, CA, or Central San Jose, CA, the same crew and the same trade-grade materials are available for your chimney or dryer vent.
Serving Evergreen, CA – Our Local Coverage Area
We’re based in the Evergreen area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Evergreen
We schedule Evergreen jobs by area and usually reach most homes within a few business days. Because we run camera inspections and carry trade-grade parts on the truck, many repair estimates and sweeps happen in one visit rather than two.
Some Evergreen hillside communities have architectural review rules for exterior changes like visible cap replacements or chase repairs. Interior flue work like liner installation usually doesn’t require HOA approval. If your HOA has questions about materials, our copper and stainless cap specs can usually answer them.
If the fireplace is original to a 1980s or 1990s home, the first step is a Level 2 camera inspection. Clay-tile flues at that age often have hidden cracks even if the fireplace has barely been used. You’ll see the footage yourself, and we’ll tell you plainly what needs work now and what can wait.
If your Evergreen fireplace has been burning wood through the winter without a recent inspection, call Chimney Sweep Blossom Valley at (833) 593-5179 today for a free estimate. We’ll camera the flue, show you exactly what we find, and give you a flat price before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Evergreen Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Norma Mendoza"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Rosa Martinez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Vivian Wong